This alkaline detergent is formulated for use in hot
tanks and mechanical recirculating spray-wash
systems for cleaning aluminum and other metal parts.
SONIC WASH LF combines high-performance
surfactants, alkalinity boosters, water-conditioning
agents, and corrosion inhibitors to deliver:
• Very fast and effective cleaning
• Excellent oil and soil removal
• Residue-free rinsing in a variety of water conditions
Effective on soils such as buffing compounds,
carbon, coolants, dirt, fats, grease, inks, cutting oils,
drawing compounds, fingerprints, forming oils, selfemulsifying
oils, silicone lubricants, tar, pitch, and
waxes.
Recommended substrates: steel, aluminum,
chrome plating, titanium and titanium plating, zinc and
galvanized surfaces, plastics, and concrete.
Material compatibility and soil removal should always
be confirmed by testing representative parts and
contaminants under actual cleaning conditions.
Applications include.
- Cabinet & in-line spray wash systems
- Turbulation spray-wash systems
- Immersion tanks
- Ultrasonic parts washers
DIRECTIONS FOR USE:
Hot tank applications
Use SONIC WASH LF at 5–15% v/v in water (5-10% is
most typical). For optimum cleaning, maintain the
solution temperature between 50–77°C. Higher
temperatures will shorten cleaning time.
Mechanical recirculating spray -wash systems
Use SONIC WASH LF at 5–10% v/v in water (6-7% is
most typical), depending on soil load and part
cleanliness requirements. For optimum cleaning,
maintain solution temperatures between 50–77°C.
Cleaning time will vary based on product
concentration, solution temperature, and soil severity.
After the washing cycle is complete, any residual
SONIC WASH LF can be easily rinsed from parts with
water. Adjust dilution ratios as needed to achieve the
desired performance.
Product Properties
Appearance: Clear amber liquid
Odor: Mild, virtually odorless
Foam tendency: Low
Specific Gravity, at 20C: 1.10-1.20 kg/L
Flash Point: None
VOC Content: None
Freeze Point: <0oC.
pH, 1% solution, at 20oC: 10-13
