top of page
PARTS CLEANER PRO

PARTS CLEANER PRO

C$0.00Price
Parts Cleaner Pro is a high‑performance solvent blend formulated for rapid degreasing and cleaning of metal components, mechanical parts, and industrial equipment. Its fast-evaporating mixture is engineered to dissolve oils, greases, and hydrocarbon-based contaminants quickly without residue.
Parts Cleaner Pro is ideal for maintenance shops, machine repair facilities, automotive service bays, and industrial parts washing operations where speed and aggressive solvent cleaning are required.
FEATURES & BENEFITS
• Fast‑drying solvent system — leaves minimal residue
• High solvency strength for oils, grease, adhesives, and general hydrocarbon soils
• Excellent penetration into tight mechanical tolerances
• No water content — ideal for moisture‑sensitive components
• Effective for dip‑tank, and localized spray applications
• Clear, colourless liquid with mild alcohol‑solvent odour
• Chlorine-free and Acetone-free formulation.
Size
4 L
20 L
205 L
Quantity

  • Technical Data Sheet

    This alkaline detergent is formulated for use in hot
    tanks and mechanical recirculating spray-wash
    systems for cleaning aluminum and other metal parts.
    SONIC WASH LF combines high-performance
    surfactants, alkalinity boosters, water-conditioning
    agents, and corrosion inhibitors to deliver:
    • Very fast and effective cleaning
    • Excellent oil and soil removal
    • Residue-free rinsing in a variety of water conditions
    Effective on soils such as buffing compounds,
    carbon, coolants, dirt, fats, grease, inks, cutting oils,
    drawing compounds, fingerprints, forming oils, selfemulsifying
    oils, silicone lubricants, tar, pitch, and
    waxes.
    Recommended substrates: steel, aluminum,
    chrome plating, titanium and titanium plating, zinc and
    galvanized surfaces, plastics, and concrete.
    Material compatibility and soil removal should always
    be confirmed by testing representative parts and
    contaminants under actual cleaning conditions.
    Applications include.
    - Cabinet & in-line spray wash systems
    - Turbulation spray-wash systems
    - Immersion tanks
    - Ultrasonic parts washers

    DIRECTIONS FOR USE:
    Hot tank applications
    Use SONIC WASH LF at 5–15% v/v in water (5-10% is
    most typical). For optimum cleaning, maintain the
    solution temperature between 50–77°C. Higher
    temperatures will shorten cleaning time.
    Mechanical recirculating spray -wash systems
    Use SONIC WASH LF at 5–10% v/v in water (6-7% is
    most typical), depending on soil load and part
    cleanliness requirements. For optimum cleaning,
    maintain solution temperatures between 50–77°C.
    Cleaning time will vary based on product
    concentration, solution temperature, and soil severity.
    After the washing cycle is complete, any residual
    SONIC WASH LF can be easily rinsed from parts with
    water. Adjust dilution ratios as needed to achieve the
    desired performance.
    Product Properties
    Appearance: Clear amber liquid
    Odor: Mild, virtually odorless
    Foam tendency: Low
    Specific Gravity, at 20C: 1.10-1.20 kg/L
    Flash Point: None
    VOC Content: None
    Freeze Point: <0oC.
    pH, 1% solution, at 20oC: 10-13

bottom of page